Why is the click-through rate on my LinkedIn ads so low?
Often it's the setup, not just the ad: brand awareness ad sets optimize for reach, and boosted posts are charged by impressions, so neither chases clicks. Audience Network (on by default for single image, carousel, document and video ad sets) and audience expansion add impressions outside the feed or your exact audience. Then check the ad: LinkedIn bases relevance on CTR and engagement, and recommends four or more ads per ad set, a clear call to action and replacing the weakest. Kiin Labs, a third party, puts the median single image landing page CTR at 0.37%.
Ask Tofu next
Pick a question and Tofu Ads Agent answers it in chat.
- Which of my LinkedIn ads had the lowest CTR last month?
- Is Audience Network dragging down my LinkedIn CTR?
- Write four new single image ad variations for my best LinkedIn ad set
- Should I boost LinkedIn posts or run Sponsored Content from Campaign Manager?
- How do I turn off audience expansion on all my LinkedIn ad sets?
As of November 2026.
Before you start
- Give it a week. LinkedIn recommends running an ad set at least seven days to see results.
- Have a fair yardstick. LinkedIn's help pages don't publish a CTR benchmark. Kiin Labs, the research arm of the B2B paid media agency Kiin, puts the median single image ad at 0.37% counting clicks to your website (bottom quarter 0.27%, top quarter 0.50%) and 0.65% counting all clicks, from 700+ accounts in its panel between September 2025 and September 2026, with Audience Network excluded. These are Kiin's figures, not LinkedIn's. For what those clicks cost, see LinkedIn CPM, CPC and cost per lead.
- Campaign Manager access to change columns, breakdowns and ad set settings.
Step 1: Check which clicks your CTR counts
LinkedIn defines Average CTR as the "Percentage of chargeable clicks relative to impressions," and what's chargeable depends on the objective. A Website visits ad set counts clicks that open your URL but not clicks on your company name or logo, while an Engagement ad set also counts social actions, follows and company page clicks. So two ad sets with different objectives aren't counting the same clicks.
To see only clicks that reach your site, add the clicks to landing page column from LinkedIn's engagement metrics. Why LinkedIn ad clicks don't show up in GA4 goes through which clicks each objective counts.
Step 2: Check what the ad set is built to get
LinkedIn optimizes each objective for a different result:
| Objective | LinkedIn's recommended optimization goal |
|---|---|
| Brand awareness | Reach |
| Website visits | Landing page clicks |
| Engagement | Engagement clicks |
| Video views | Video views |
| Lead generation | Qualified leads |
A brand awareness ad set optimizes toward reach or impressions, so it's built to reach people, not to find the likeliest clickers. LinkedIn even recommends Audience Network or audience expansion for it. Judge it on reach, not CTR.
Boosted posts work the same way. LinkedIn says boosting a Page post uses maximum delivery and is charged "by impressions." The default audience is a "Suggested audience" chosen by AI, and boosting has fewer objective, audience and bid options than Campaign Manager.
If you want clicks, run a Website visits ad set in Campaign Manager with landing page clicks as the goal (the default). A result like 13 clicks from 398,000 impressions, about 0.003%, is far below even Kiin's bottom quarter. That gap points to the objective or placement before the creative.
Step 3: Separate Audience Network and the right rail
LinkedIn Audience Network is on automatically for new single image, carousel, document and video ad sets. It shows your ads on third-party apps and sites, and LinkedIn says those impressions and clicks aren't MRC-accredited.
Split it out: in Campaign Manager, select Advertise, open the Ad sets tab, then Breakdown > On/Off Network. Compare the CTR on the Audience Network and On LinkedIn rows. If the On LinkedIn row looks normal, Audience Network is dragging the blended number down. Should I turn off LinkedIn Audience Network? covers the trade-off and the block lists.
LinkedIn is also testing single image ads in the desktop right rail. It doesn't charge for those impressions yet, and it reports feed and right rail together, so you can't see each one's CTR. See LinkedIn's right rail placement.
Step 4: Check who's seeing the ad
Audience expansion is turned on automatically where it's available. It adds "member accounts with similar attributes to your target audience," and their activity is in your numbers. To turn it off, edit the ad set and clear Enable Audience Expansion in the Audience section.
Then open Professional Demographics from the Advertise page and set Display to job title, seniority or company. You'll see impressions, clicks and CTR for each. For low engagement, LinkedIn suggests looking at who's interacting and testing different targeting attributes. If one group clicks and another doesn't, split them into separate ad sets with ads written for each.
Step 5: Fix the ad and the offer
LinkedIn says ads get "relevance scores based on factors like click-through rate, comments, likes, and shares," and "The more relevant your ad, the lower the price you pay." So a weak ad costs you twice: fewer clicks, then dearer impressions.
LinkedIn's own advice for ads that get impressions but little engagement:
- Run four or five ads per ad set, varying the image, headline or URL, and let them compete.
- Tailor each ad to the audience segment it targets.
- Use a clear call to action, such as Learn More, Request Info, Contact Us, Sign up or Download.
- Turn off the lowest-CTR ad and replace it with a new one.
Keep single image text short: LinkedIn says to use up to 150 characters of intro text and 70 for the headline "to avoid truncation." It recommends vertical 4:5 images, which serve only on mobile, or 1200 x 628 for landscape.
Ads that work on other platforms don't always carry over. For format-by-format examples of what works on LinkedIn, see what makes B2B LinkedIn ads work. To produce variations faster, see LinkedIn's AI ad variants and Brand Kit.
Step 6: Watch for fatigue
Add the Reach and Average frequency delivery columns. If frequency keeps rising while CTR falls, the same people are seeing the same ads. Rotate in new ones as in step 5. A falling CTR also weakens relevance, which raises costs.
If CTR is fine but the visits don't show up on your site, that's a different problem: see why LinkedIn ad clicks don't show up in GA4.
Common problems
| Problem | Why it happens | Fix |
|---|---|---|
| Boosted post with huge impressions and almost no clicks | Maximum delivery, charged by impressions, a suggested audience | Rebuild it as a Website visits ad set in Campaign Manager |
| Low CTR on a brand awareness ad set | It's optimized for reach | Judge it on reach and frequency, or change the objective |
| Blended CTR low, On LinkedIn row normal | Audience Network | Turn it off, or use a block list |
| Clicks from job titles you didn't target | Audience expansion | Clear Enable Audience Expansion |
| Document or engagement ad has a high CTR but little traffic | Engagement ad sets count social actions and, for document ads, page turns as clicks | Read clicks to landing page instead |
| New ad set, no clicks after two days | Too early, or one ad doing all the work | Run seven days with four or more ads |
Where Tofu fits
Tofu Ads Agent (our product) builds on-brand single image, carousel, document, video and conversation ads from your fonts, colors, logos and approved templates, with every element an editable layer. It sets LinkedIn targeting from a plain-English description of job titles, seniority, function, industry, company size or named companies. Its weekly creative recommendations stay proposals until you approve them. Its audience penetration filter caps impressions per company (by default 100 in 7 days) and leaves a company that passes the cap out of the campaign for a week. Tofu can't promise a CTR, and it doesn't change LinkedIn's auction or relevance scoring.
Sources
- Ads not receiving impressions or engagement (LinkedIn help), checked November 8, 2026
- Performance metrics in Campaign Manager (LinkedIn help), checked November 8, 2026
- Engagement metrics in Campaign Manager (LinkedIn help), checked November 8, 2026
- Chargeable clicks for website visits campaigns and ad sets (LinkedIn help), checked November 8, 2026
- Marketing objectives available for your ad campaigns (LinkedIn help), checked November 8, 2026
- Website visits ad objective (LinkedIn help), checked November 8, 2026
- Ad set setup best practices (LinkedIn help), checked November 8, 2026
- Boost a post from your company's LinkedIn Page (LinkedIn help), checked November 8, 2026
- Budget, bidding, and schedule when boosting a LinkedIn Page post (LinkedIn help), checked November 8, 2026
- Enable or disable LinkedIn Audience Network for your Sponsored Content ad sets (LinkedIn help), checked November 8, 2026
- LinkedIn Audience Network (LinkedIn help), checked November 8, 2026
- Performance reporting for LinkedIn Audience Network on/off network breakdown (LinkedIn help), checked November 8, 2026
- Sponsored Content right rail ad placement (LinkedIn help), checked November 8, 2026
- Use audience expansion in your ad set (LinkedIn help), checked November 8, 2026
- Professional demographics for your LinkedIn Ads in Campaign Manager (LinkedIn help), checked November 8, 2026
- LinkedIn's advertising cost and pricing (LinkedIn help), checked November 8, 2026
- Single image ads advertising specifications (LinkedIn help), checked November 8, 2026
- LinkedIn Ads Benchmarks (Kiin Labs, third party), checked November 8, 2026