How do we judge our agency's awareness campaigns on LinkedIn, YouTube or Meta when they bring traffic but almost no leads?
Judge them on what awareness ads are bought to do: reach your target accounts often enough, then lift brand recall, branded search and later conversions from those accounts. Few leads from the same visit isn't a failure on its own. For proof, run a brand lift study. LinkedIn's needs at least $60,000 in campaign budget for one question. Google's starts at $10,000 in the US for one question and needs a Google rep. Meta's US minimum is $175,000. Below those budgets, use a branded search holdout or a conversion lift test instead.
Ask Tofu next
Pick a question and Tofu Ads Agent answers it in chat.
- How many of my target accounts did our LinkedIn awareness campaigns reach last month?
- Break down my Meta ad clicks by placement for the last 30 days
- Is my LinkedIn budget big enough for a Brand Lift test?
- How do I set up a regional holdout to measure branded search lift?
- Which YouTube channels and placements did my video ads show on?
As of November 2026.
Before you start
- Reporting access to LinkedIn Campaign Manager, Google Ads (YouTube ads run through it) and Meta Ads Manager.
- The brief or proposal where the agency said what the awareness campaigns would do.
- Your target account list, and leads and pipeline from your CRM by week.
- Google Analytics 4 on your site with UTM tags on the ads, and Search Console or another way to track searches for your name.
Step 1: Check what the campaigns were set up to do
Open each campaign and note its objective. An awareness objective buys reach, not leads; our page on LinkedIn campaign objectives covers what each one is for.
If the agency promised leads from awareness campaigns, the plan was the problem, not the results. If it promised reach and recall, hold it to that. Write down the two or three numbers you'll judge it on before you open the reports.
Step 2: Check who saw the ads, and how often
Awareness is only worth paying for if the right people saw the ads enough times.
- LinkedIn: Reach is the number of unique member accounts with at least one impression. Average frequency is the average number of impressions per reached account. Audience penetration is the share of your target audience reached, shown when the audience has at least 300 members. LinkedIn says these are modeled estimates to use directionally, not for comparisons over time.
- Meta: Frequency is the average number of times each account saw your ad (impressions divided by reach, from sampled data). Meta says to watch it next to your results: if performance drops as frequency rises, the audience may be tired of the ad.
Then check whether the impressions landed on your target accounts. Getting company-level ad engagement into your CRM is on our page about LinkedIn ad engagement in HubSpot or Salesforce. If you run an ABM platform, see reading Demandbase results.
Step 3: Check where the clicks came from
Clicks that never turn into leads can come from apps and partner sites rather than the main feeds. Break the traffic down by placement:
- LinkedIn: In the Campaigns, Ad sets or Ads tab, select Breakdown, then On/Off Network. This splits LinkedIn itself from the LinkedIn Audience Network.
- Meta: In Ads Manager, select Breakdown (between Columns and Reports), then Placement. Meta notes the values are estimated.
- Google: Go to Campaigns, then Insights and reports, then "When and where ads showed," then the "Where ads showed" tab. Google warns it isn't a full list of placements, and that per-placement data is usually too thin to optimize hard on.
Then check the visits in Google Analytics 4. GA4 counts a session as engaged if it lasts longer than 10 seconds, has a key event, or has two or more page views. If most sessions from a campaign aren't engaged, its clicks aren't real interest, whatever the click-through rate says.
Step 4: Look for effects that show up later
Awareness ads work over weeks, so look past the first visit:
- View-through conversions. LinkedIn's default conversion window is 90 days after a click and 90 days after a view. Google counts an engaged-view conversion when someone watches at least 10 seconds of a skippable in-stream ad (5 seconds for in-feed and Shorts ads) and converts later, within 3 days by default for web conversions. Meta credits actions taken off the ad within the days set by the ad set's attribution setting after someone viewed or clicked. These show people who saw an ad and converted later. They don't prove the ad caused it.
- Branded search and direct visits. Awareness ads should lead more people to search your name and come straight to your site. Seasons, launches and press muddy a before-and-after look, so a holdout by region is stronger. Our page on measuring lift in direct traffic and branded search walks through the method; it's written for ChatGPT ads, but the steps work for any channel.
- Pipeline from reached accounts. Compare how many reached target accounts became opportunities with similar accounts the ads didn't reach.
Step 5: Run a brand lift study if your budget qualifies
A brand lift study surveys people who could see your ads and a control group held back from them, then compares the answers. It is the most direct test of whether awareness ads changed what buyers think.
| Google (YouTube) | Meta | ||
|---|---|---|---|
| How to start | Test page in Campaign Manager; no fee | Ask your Google account representative; not available for all accounts | Experiments, in Meta's ads tools |
| What it covers | An ad account or a campaign | Video, audio and Demand Gen campaigns | One campaign, or all of an ad account's advertising |
| Minimum budget | Cumulative budget of $60,000 for one question, $90,000 for two, plus $45,000 for each question after that | In the US: $10,000 for one question, $20,000 for two, $60,000 for three, within a 10-day window | US $175,000; UK $64,000; Canada $54,000; Germany $110,000; $15,000 in countries Meta doesn't list |
| What it measures | Brand favorability, employer favorability, familiarity, consideration, recommendation | Ad recall, brand association, awareness, consideration | Answers to your brand survey |
| Other limits | Runs 2 weeks to 90 days; audience of 1 million recommended, at least 300,000 strongly encouraged; an account-level test can't run alongside an account-level Conversion Lift test | Don't change budgets until the study reaches 100% progress | Minimums as of September 15, 2026; with several countries, the highest minimum applies |
Neither LinkedIn nor Google promises a clear answer: LinkedIn says conclusive results aren't guaranteed and results can move for up to 15 days after the end date, and Google says meeting the minimum raises the chance of results without guaranteeing it. Agree with the agency up front on what lift counts as success.
Step 6: If your budget is too small for a study
- Pool budgets. LinkedIn counts the cumulative budget of your active campaigns at account or campaign level. Meta lets one test cover all of an ad account's advertising.
- Ask one question. It has the lowest minimum on both LinkedIn and Google.
- Hold out regions. Pause the awareness campaigns in some regions and compare branded search, direct visits and demo requests with regions where they keep running, using the holdout method above.
- Test conversions instead. A conversion lift test shows whether ads caused extra leads. See our pages on Google Conversion Lift and Meta Conversion Lift.
- Set a time box. Agree on an end date, the numbers from Steps 2 to 4, and the result that keeps the budget going.
Step 7: Agree on a scorecard with the agency
Hold awareness campaigns to reach and frequency on your target accounts, engaged visits, the later effects in Step 4 and brand lift results when the budget allows. Don't hold them to cost per lead from the same visit. For the rest of an agency review, see how to know if your B2B PPC agency is doing a good job.
Common problems
| Problem | Why it happens | Fix |
|---|---|---|
| Lots of clicks, almost no engaged sessions | Clicks come from placements that send low-interest visits | Break down by placement (Step 3) and ask the agency to cut the weak ones |
| View-through conversions look great | Long view windows (LinkedIn's default is 90 days) count anyone who got an impression in that time | Treat them as a hint; use a holdout or a lift study for proof |
| Brand lift study came back inconclusive | Too few survey answers; LinkedIn says higher budgets let more surveys show | Run longer, raise the budget or ask fewer questions, and wait 15 days after the end on LinkedIn |
| Branded search rose, but so did everything else | Seasons, launches or press, not the ads | Compare with a holdout region |
Sources
- Get started with Brand Lift Testing - LinkedIn Marketing Solutions Help, checked November 10, 2026
- Brand Lift Testing budget guidelines - LinkedIn Marketing Solutions Help, checked November 10, 2026
- Campaign Manager delivery metrics - LinkedIn Marketing Solutions Help, checked November 10, 2026
- LinkedIn Audience Network FAQs - LinkedIn Marketing Solutions Help, checked November 10, 2026
- LinkedIn conversion window - LinkedIn Marketing Solutions Help, checked November 10, 2026
- About Brand Lift - Google Ads Help, checked November 10, 2026
- Set up Brand Lift - Google Ads Help, checked November 10, 2026
- About the "Where ads showed" report - Google Ads Help, checked November 10, 2026
- About Engaged-view conversions - Google Ads Help, checked November 10, 2026
- [[GA4] Engagement rate and bounce rate - Analytics Help](https://support.google.com/analytics/answer/12195621), checked November 10, 2026
- Brand Lift minimum requirements - Meta Business Help Center, checked November 10, 2026
- Frequency - Meta Business Help Center, checked November 10, 2026
- View ad results by platform, device and placement in Meta Ads Manager - Meta Business Help Center, checked November 10, 2026
- About Facebook's attribution system - Meta Business Help Center, checked November 10, 2026